POLICRIL 290 Policril 290 is a water based styrene acrylic copolymer dispersion, free from APEOs, plasticizers and solvents. After evaporation of water (at a temperature above the MFFT) it forms a transparent film with no tackiness. For a perfect film formation at low temperatures it needs some coalescing agent. Formaldehyde or formaldehyde releasing agents are not intentionally added during the production process. Policril 290 is particularly suitable for the formulation of interior paints with high wet scrub resistance and exterior paints with high water resistance. The polymer shows a very high adhesion on a wide variety of substrates. ______________________________________________________________________________________________________________________ POLICRIL 223 Il Policril 223 is a water dispersion of a styrene acrylic copolymer and it is free from APEOs, plasticizers and solvents. After the water evaporates, it forms a flexible film with a very low stickiness. For the film formation it does not need any coalescing agent, as it comes out from the low MFFT. Policril 223 is particularly suited for the formulation o highly flexible sheaths and paints with a very high water resistance. The polymer show a high adhesion to different substrates. ______________________________________________________________________________________________________________________ POLICRIL 574 Policril 574 is a water based styrene acrylic copolymer dispersion, free from plasticizers and solvents. After evaporation of water (at a temperature above the MFFT) it forms a very flexible film with low residual tackiness. It does not need any coalescing agent for the film formation, because the dispersion is formulated to form the film at the lowest possible temperature. Policril 574 is particularly suitable for the formulation of paints and membranes with high flexibility and water resistance. It is also extremely suitable for priming difficult to bond substrates as it shows a very high adhesion on a wide variety of substrates.